Vertrauen File Transfer Protocols

ANSI view and strip utility for Zmodem and Pro-YAM users, and anyone else that uses a comm program that can capture an online session with ANSI escape codes intact. Ver. 2.01: minor enhancements.

Bidirectional protocol discussion info. 02/07/93.

Bimodem Logfile Analyzer v1.0. Nice screen display. Command line parameters for history log and ANSI Screen.

Bimodem protocol transfers files both directions at once.

BImodem PRO (PAMPA) v3.1: A new full BImodem.com-compatible protocol. Supports 4DOS comments. Add files to send/receive queue while in-session. Capture chat to file. Remote's chat window scrollback. Nice screen design. XferProgress bar. A lot of new functions. New BImodem PRO (PAMPA) developed in Repblica Argentina, Sud Amrica.

Bisearch 2.00 bimodem interface for SLBBS v2.15+.

CCSP.exe is an external protocol to be used with BBSs and communication packages like PROCOM(+), Boyan, Telix, Qmodem...

FreeWare X, Y, and Zmodem protocol driver from the author of The Blue Wave Offline Mail System. Protocols include Zmodem, 8K Zmodem (ZedZap), Ymodem, Ymodem-G, Ymodem-1K, Xmodem CRC and Xmodem-Checksum. Fully windowed graphical interface.

Add HS/LINK as External Protocol to Cedar Island Link. CILNK252.ZIP or later. Prompt for filenames (Allows Wildcards) and includes help screens. EZ to setup ! CIL is a DOS, DV, or Windows Comm. Program with AWESOME Mouse Support ! (File dates 10-10-92)

Add SZmodem as External Protocol to Cedar Island Link. (CILNK252.ZIP or Later). SZ Auto-Resume / Turbo Mode / Faster than Zmodem / Chat / Play GAMES while transfer / Connect to DSZ also. Kit has one bat that can be used for both UP/DOWN loads . Also includes EZ bats for script transfers. CIL has AWESOME Mouse support.

Add Tmodem as an External Protocol to Cedar Island Link. For CILNK252.zip or later. Kit has one bat that can be used for both UP & DOWN loads . Includes EZ bats for script transfers. Tmodem is faster than ZModem & has exceptional performance on poor connects. CIL has AWESOME Mouse support.

Add Moby Turbo Zmodem as an External Protocol to Cedar Island Link. (CIL includes Non-Moby ZModem as an internal). For CILNK252.zip or later. Kit has one bat that can be used for both UP/DOWN loads . Also includes EZ bats for script transfers. You need a REGISTERED DSZ for Moby. CIL has AWESOME Mouse support.

CSZCOMM.EXE is "Classic ZCOMM" with the classic file transfer display. It is otherwise identical with, and compatible with ZCOMM.EXE, except for the file transfer display and the GCOLORS command.

Chat Manager Protocol or CMP for short. CMP is an external protocol for use with ALL communication packages that can handle external protocols or jump to dos. (Telix, Telemate, Procomm etc. etc.)

DARC v1.01; BBS utility that shells around external protocols and allows users to convert archive files from one format to another. Can be configured to convert .ZIP files to .ARJ files, .JPG files to .GIF files, .ARC files to self- extracting archives, etc. May be configured to run with any command line driven external protocol such as DSZ, GSZ, HSLINK, etc. Totally sysop configurable. Supports custom text or ANSI

Classic stand-alone shareware sends or receives files using ZMODEM-90(Tm), True YMODEM(Tm), or XMODEM. "Talk" command term emulation for automatic ZMODEM downloads. Features fast background transfers to 115200 bps in small windows. Table driven CRC-32, ZMODEM compression, Crash Recovery(Tm), advanced file management. May-29-93 ver. now supports IRQ9-IRQ15.

DSZ.EXE From Omen Technology; .EXE version uses macro expansions instead of subroutine calls for CRC calculations, the compilation is speed optimized, and the MS library routines may be faster than their TurboC counterparts.

Text helps you out on how to make the zmodem protocol.

EZ protocol engine, X, X1k, YB, YG, S, Z sub for DSZ.COM

Express ZMODEM v.1.0: Provides unattended background Zmodem capability

What's in a protocol? Text file concerning file transfer protocols.

Funcolors V1.1 Sets Your Zcomm File Transfer Screen Colors to A Different Configuration Each Time You Start Zcomm.

RoboBOARD/FX v1.00 & Tel-FX Protocol Information: info is about a new Graphical Protocol called TEL-FX, this Protocol supports ANSI,VGA and Super VGA. Supports from 640x480 all the way too 1024x768 using (16 and 256 colors!) Can send .GIF files and as well as JPEG pictures! Sound is included for Sound Blaster and other sound cards! Uses multiple Windows that you can move around on your screen, and a message editor, like you

Visually striking big brother to DSZ, the Classic stand-alone shareware that sends or receives files using ZMODEM-90(Tm), True YMODEM(Tm), or XMODEM. Includes GCOLORS to customize display color scheme. Supports shared files. Faster ZMODEM than Procomm Plus and DSZ.COM, not as fast as DSZ.EXE, ZCOMM and Pro-YAM. Bigger than DSZ.EXE. May-29-93 Now supports IRQ9-IRQ15.

Update to Hydracom 1.00, no documentation 03/12/93.

HS-INST.ZIP Contains instructions and setup files to help install the HS/Link protocol in a variety of COMM and BBS programs. Updated 2 pm, Tuesday, November 26, 1991.

HS/Link External Protocol RELEASE v1.20 As of 12:41 pm, Sunday, April 11, 1993 HS/Link is a new high speed, single and bi- directional file transfer protocol with many advanced features. It is EASY to set up and runs very fast with all kinds of modems. Now includes ONLINE CHAT mode. FHSLINK.EXE now supports FOSSIL drivers.

Installing HS/LINK external protocol in PCBoard BBS

Install HS/Link protocol in {COMMO} (also download HSLK10B4.ZIP or newer)

HS-INST2.ZIP Contains instructions and setup files to help install the HS/Link protocol in most COMM and BBS programs.

Installing HS/LINK External Protocol in ProBoard BBS

Install HS/Link protocol in Procomm for Windows.

Installing HS/LINK External Protocol in RBBS-PC v17.3C

Hilfe zur Installation von HS/Link unter RA (using HS/Link and Remote Access BBS)

Batch files to upload/download with HS/Link and Robocomm

Installing HS/LINK External Protocol in SpitFire BBS

Install HS/Link protocol in TELIX (also download HSLK10B4.ZIP or newer)

Installing HS/LINK External Protocol in UltraBBS v2.08

Installing HS/LINK External Protocol in Virtual BBS 5.4

Proper setup to use with Wildcat 3.50 to allow bidirectional file transfers. This same batch file also works with Wildcat's Tomcat QWK mail door to allow bidirectional mail

HSCATS v3.0; WildCat 3.xx and HS/LINK interface help Docs

Windows DLP HS/Link Protocol BETA GERMAN LANGUAGE VERSION As of 5:50 am, Monday, July 12, 1993 This is a special version of HS/Link designed for use with ProComm Plus for Windows in the Windows environment.

HSLBATCH is an example batch file and accompanying info on optimizing batch file transfers for HS/Link using QModem and BEWCONV. One keystroke for bidirectional batch uploads and downloads.

Boyan 5.0 script to unzip/register the latest version of HSLink. Unzips, over- writes older file versions, simplifies updating.

HS/Link external protocol driver 1.1beta High speed, full streaming, bi-directional batch file transfer protocol with advanced full-streaming-error-correction and dynamic-code-substitution. It is easy to use

Batch files to allow simultaneous REP/QWK transfers, as well as file transfers using HS-Link with Robocomm in a 4DOS environment. Also works with NDOS. Usable with mail doors that allow simultaneous transfers.

A SALT script for TELIX which makes running HS/LINK easy.

Allows you to create a HS/LINK list ahead of time for your uploads, then it runs the HsLink normally with your uploads taken from the list you created off line.

Text file and files needed to install HSLink version into Telegard 2.5q Beta or higher.

HSLBATCH is an example batch file and accompanying info on optimizing batch file transfers for HS/Link using QModem and BEWCONV. One keystroke for bidirectional batch uploads and downloads.

Information on setting your USR HST 16.8 modem.

HST Setup Notes; These notes describe how to set up the U. S. Robotics Courier HST (14.4K bps), or HST Dual Standard, modem and typical, IBM-type, PC communications software

Replacement for HS-TELIX.ZIP provided by Sam Smith, fixes two problems that might be found when uploading and downloading.

Script & Source to add HS/Link Log info t ZLOG File for Telix 3.15 Identifies the bbs, date, and time eliminated extraneous screen writes.

Hayes Student Discount Program Info Students can purchase Hayes products at a substantial discount...

Brand new external protocol that does bi- directional transfers much like hs/link does. From the original author of frontdoor.

Interrupt and IRQ help file for Columbia Kermit users in response to statements about IRQ conflict problems (COM3/COM4).

MS-DOS Kermit 3.13: high-quality, full function communication software for IBM and compatible PCs with DOS or Windows.

Contains 2 very simple macros to interface MS Kermit with GSZ or DSZ.

Log File Analyzer version 1.00. For users of HS-LINK or Zmodem MobyTurbo. View the log file created by these protocols. Will display informationin a more readable format.

OS/2 External Zmodem protocol, faster than DOS Zmodem. Protocol has a built in host mode and erminal and is less than 160k! Very simple, powerful and fast. A must have for all OS/2'ers.

Utility for use with HSLink 1.1 to create a list of downloadable files for duplicate checking.

Enables DSZ's Mobyturbo file transfers with opus.

MSDOS Kermit DEC Keyboard Setups for the IBM PC, PS/2 and compatibles.

MX-Light v1.7; MX-Light, easy to use communications program Protocols included are ASCII, Kermit, Xmodem, Ymodem, Zmodem, Xmodem/1K, Xmodem/ G,Ymodem/G. Full Screen Editor, Internal ANSI,Avatar and VT100 Drivers.Capture Doorway Many other features. Auto Zmodem Downloads

Nmodem 2.31, high-speed file transfer protocol, uses 2K blocks, faster than Zmodem

Anti-LeechZmodem! Stop lamers who leech off your system with this excellent utility!

PHOMAST v6.4; Enjoy the power of YAM or ZCOMM yet not have trouble setting up a difficult communications package. This is very comprehensive.

Protocol Enhancer v1.0; Don't put up with the hassle of installing external protocols anymore, just follow the simple instructions and let this program do it all for you!

SBC allows you to choose colours for BinkleyTerm interactively; when you're finished, it modifies (with your permission) your configuration file appropriately.

Utility to scan DSZLOG files and return ERRORLEVEL according to command line options. Use in batch files with HS/Link to determine results of a transfer.

Streamline Design Protocol Module v1.0; This protocol module offers both graphical and ASCII status screens, ASCII, XModem, XModem Relaxed, XModem/CRC, XModem/CRC Relaxed XModem-1k, XModem-1k, Relaxed, XModem-1kG, XModem-1kG Relaxed, Ymodem, YModem Relaxed, YModemG, YModemG Relaxed, YModem-128, YModem-128 Relaxed, ZModem, ZModem-8k, and Kermit. It also has many options for managing files and various port options.

Streamline Design (Lite) Digi Protocol Module v1.01d; Offers ASCII status screens, XModem, XModem Relaxed, XModem/CRC, XModem/CRC Relaxed, XModem-1k, XModem-1k, Relaxed, XModem-1kG, XModem-1kG Relaxed, Ymodem, YModem Relaxed, YModemG, YModemG Relaxed, YModem-128, YModem-128 Relaxed, ZModem, ZModem-8k. It also has many options for managing files and various port options.

Streamline Design (Lite) Fossil Protocol Module v1.01d; Offers ASCII status screens, XModem, XModem Relaxed, XModem/CRC, XModem/CRC Relaxed, XModem-1k, XModem-1k, Relaxed, XModem-1kG, XModem-1kG Relaxed, Ymodem, YModem Relaxed, YModemG, YModemG Relaxed, YModem-128, YModem-128 Relaxed, ZModem, ZModem-8k. It also has many options for managing files and various port options.

Streamline Design (Lite) Protocol Module v1.01d; Offers ASCII status screens, XModem, XModem Relaxed, XModem/CRC, XModem/CRC Relaxed, XModem-1k, XModem-1k, Relaxed, XModem-1kG, XModem-1kG Relaxed, Ymodem, YModem Relaxed, YModemG, YModemG Relaxed, YModem-128, YModem-128 Relaxed, ZModem, ZModem-8k. It also has many options for managing files and various port options.

Select protocol at time of transfer. Encourages external protocols.

Super 8-k super-fast protocol. Excellent. Easy setup.

An external protocol for viewing images via the On-Line Sales Door. It was developed to allow users who are not using clickcomm, to be able to view inages while online.

How To Set Up SZModem v2.0 (SZMODEM.EXE) With TriBBS v4.x - Includes Sample Batch Files & A DOC That Explains How To Set Up Super ZModem With Your TriBBS Board.

SZMODEM v2.00; zmodem-compatible protocol with a few added features. It is fully compatible with normal zmodem, but adds special capabilities both when talking to normal zmodems and while talking to other copies of SZModem.

TIMESEND - 2.01 βeta Compiled 03/25/93 [FREEWARE] By Fifth Dimension Software You can figure out the time needed to transmit a program over ZMODEM at baud rate you specify.

Zmodem Protocol - Texas Zmodem v2.20 An Excellent sustitute of DSZ; Default to TONE type Phones; May be used as TERMINAL program; FREE for non-comercial sites

virtual XYmodem transfer protocols v2.30 for VBBS and VGIX

Ymodem/Ymodem-G 6.0 External Protocol by the makers of tmodem/zmax.

Batch files for DSZ; State-of-the-Art File Transfer Engine that functions as a DOS Console Terminal or, as an External Transfer Protocol Driver for sending and receiving Files.

Zmodem 13.10. DSZ Zmodem compatible external protocol, with full 32 bit crc error detection, color screen.

ZyRion v2.49.1.0; powerful communications File transfer protocol

Zyrion00 public beta of this great new high speed protocol from Germany.

Transfer protocol: documentation states that at 14.4 it will allow a cps rate of about 1900.. sysops get registraion free if you have a valid fidonet number.. tells in documentation how to set it up with remote access.